Excellent for destacking tubular parts, or in the load/unload of hydroforming applications. The angular shape and soft edge of the cup is pliant and easily conforms to many structures. This cup is used in applications where an exact transport and deposit of the part in a repeatable position is essential. The interior rib geometry holds parts securely during the accelerated or decelerated transfer while avoiding the pulling of dents.

These cups area available in popular Bilsing shapes and sizes. The black NBR material is designed to work in temperatures up to +250° C. These cups share the same characteristics of their PF, HT, DM and BT Series counterparts with the benefits of working in hot forming applications where direct contact with a heated part is required.

When storing, all Hot Stamp Series cups should be laid cup side vs. mount side down, otherwise the shape of the cups can be distorted. For packaging, all materials use in covering and wrapping must be free of substances that degrade elastomers. Appropriate packaging materials include PE-coated craft paper, aluminum foil or opaque PE foil, at least 0.075mm thick. The control temperature must be below 25°C and should not be exposed to direct sunlight – the best storage condition for our cups is in dark surroundings. Additionally, the humidity should be kept so that no condensation appears during temperature changes. In these conditions, the cups can be used for up to five years. If these conditions are deviated from, the cups may only last two to three years.